Schrader Environmental Services, Inc.     Custom Built Remediation Systems.

Remediation Equipment - Buy, Sell and Rent.

SES can build all types and sizes of remediation systems, with highly customized and sophisticated controls, or instead we can supply just the individual components.   We also can blend new and used components to lower the project costs.    All equipment is tested (up to 100 HP) in-house and the equipment is guaranteed to be in working condition when it ships!  We have the largest inventory of used equipment in the United States, and we can draw from this inventory to custom build a skid-mount, enclosed mobile trailer system or remediation building for your next project or pilot test. 

Unless otherwise noted, equipment is located at the Schrader Environmental 41,000 square foot warehouse, offices and manufacturing facility in Ithaca, Michigan..

* Rental rates are based on the type of equipment and length of rental term.    Lease to own arrangements are also available. 

Date this page was last updated:  10/20/09  

Soil Vapor Extraction Equipment / Dual Phase Extraction
 

High Vacuum Liquid Ring Pumps and Reitschle pumps:

SV-2-LR)

Mobile Trailer Dual Phase Extraction System System mounted within enclosed trailer. Reitschle COVAC Model SMV300 DPE vacuum pump with 15 HP 230V, 3ph XP motor. 200 max ACFM and 24" Hg. max vacuum. Click here to see blower curve. 100 gallon fluid separator with 0.75 HP 230V 3ph XP Moyno progressing cavity pump for fluid transfer to oil/water separator. Level sensor alarms and automatic pump operation controls. NEMA 4 electrical control panel. Ideal for multi-phase extraction or bioslurping. Ready for rental.

SV-45-LR	Oil-seal Liquid Ring Pumps:  Dekker VMAX 40 HP, 2 ea. Travaini 25 HP units and a Dekker 10 HP and  7.5 HP oil -seal liquid ring pump skids.
SV-4-LR	Liquid Ring Pump System:  5 HP skid-mounted water seal LRP system. Explosion-proof controls, seal water tank, transfer tank with level sensors, safety circuits and transfer pump. 45 CFM @ 24" Hg. flow capability.

SV-37-LR.

Liquid-Ring Pump: Traivini 7.5 HP water-seal liquid ring pump. Good condition. Never actually used but the unit was left outside for several years.  In stock as of 3/2/08

SV-38-LR)

Small Liquid Ring Pump System for Dual Phase Extraction:   Dekker LRP Model: VMX 15 HP 230/460/3/60 TEFC motor Moisture separation tank Gould NPE 1 x 1.5 - 6 0.5 HP transfer pump 208/230/460/3/60 3450 RPM TEFC motor. FLA 2.4 - 2.4 / 1.2 NEMA 4 Control Panel Hand Off Auto and hour meter. In stock 3/1/08.

SV-41-LR)

Water-seal Liquid Ring Pump Skids:  Atlantic Fluidics 7.5 HP and a 15 HP unit with NEMA 7 control panel mounted with the system.

SV-43-LR

Oil-Seal Liquid Ring Pump:   Dekker Model VMX 1003 60 HP XP with soft starter. 60 gallon moisture separator tank optional.

SV-44-LR

Reitschle DLR-300 Compressor driven by 25 HP 230V 3-phase XP motor.

 

Positive Displacement (Rotary Lobe) Blowers:

SV-9-PD)

SVE Skid: Roots 36 URAI blower with 3 HP XP single phase motor. NEMA 7 EXP panel with motor starters, on/off buttons,. Rotron 20 gallon plastic knockout pot, inlet particulate filter, inlet dilution air valve, inlet and discharge silencer.

SV-12-PD

SVE system/Air Sparging System: BISCO Environmental complete system with Roots URAI47 positive displacement blower. 100 gallon moisture knockout tank. 7.5 HP 230/460V 3 phase explosion-proof motor. 0.5 HP transfer pump. 5 HP Roots 36 air sparge blower. 3 well inlet manifold. Excellent condition.

SV-13-PD)

Soil vapor extraction system:  Sutorbilt 3LP blower with 5 HP 230V single-phase XP motor. 80 gallon horizontal moisture knockout tank. 0.5 HP transfer pump. 3" threaded inlet/discharge. Discharge silencer. Set up for 200 CFM @ 6" Hg. Excellent condition.

SV-16-PD)

Combination Soil vapor extraction (SVE)/Air Sparge system:  All mounted on vertical steel skid. SVE includes Sutorbilt 4LP with 5 HP 230/ single phase non-XP motor. Air Sparge includes Sutorbilt 4HL with 10 HP 230 single-phase non-XP motor. Hankinson ACH-100 100 CFM air-to-air heat exchanger. Ready to rent or purchase - complete with new control panel.

SV21-PD.)

Soil Vapor Extraction (SVE)/Air Sparge Rental Pilot Trailer:  Complete with Roots 65 positive displacement 40 HP blower and Roots 22 blower with 5 HP sparge system. Includes 100 gallon moisture knockout tank, hoses, gages, meters, and controls. Generator not included. Excellent rental.

SV-25-PD.)

Soil Vapor Extraction Pilot Test Trailer:  15 HP motor for a Roots 47 positive displacement blower. 350 CFM. Outlet vapor cooler allows control of heat for more effective vapor carbon treatment.. Knockout pot, valves, gages, and control panel. System mounted on double axle trailer. Excellent rental unit.

SV-28-PD.)

SVE Skid:  Sutorbilt 3MP with 60 gallon vertical knockout tank and level sensor floats. 5 HP 3ph 208/230 3450 RPM

SV-33-PD.)

SVE and Air Injection System:  2-piece steel building with diamond plate floor, steel base.. Once the two halves are bolted together, the steel building is 14' wide x 20' long x 8' tall. 2 ea. Roots 68 positive displacement blowers with common 40 HP explosion proof motor. NEMA 7 control panel inside of building. The Roots blowers are mounted on top of a 200 gallon horizontal moisture knockout tank with automatic pump-out. Explosion proof lights and heater. 2 - 1500# capacity vapor carbon tanks also inside of the building. Will sell as complete system or sell parts. In stock as of April, 2008. Carbon tanks have been sold off, however.

SV36-PD.)

Soil Vapor Extraction Units: Large system. Mint condition. Ran for only about one year at a Superfund site in New York where money seemed to be no object.  . Three complete skid mounted systems complete with controls. Originally set up with Sutorbilt Model 8LP positive displacement blowers and 50 HP motors. Excellent condition. Blower sold but skid still available as of 3/1/09

SV37-PD

110V220V single phase Soil Vapor Extraction Pilot Test Skid: Sutorbilt 3LP positive displacement blower. Vacuum relief, inlet and discharge silencers. Erdco airflow meter. l. Set up to run on 230V single phase power.

SV-62-PD	Soil Vapor Extraction (SVE) Skid:  Roots 36 positive displacement blower with 5 HP 208/230/460V EXP 3 phase motor.  High temperature shutoff switch.  100 gallon vertical knockout tank, inlet vacuum guage, NEMA 7 EXP control box is slightly damaged.
SV-72-PD	High Vacuum Roots RAM DVJ Rotary Positive Blower System.   Capable of up to 16"Hg. vacuum. Up to 531 CFM.   Rotary  Roots Whispair Model 406J Blower. knockout tank, particulate filter, inlet and discharge silencer.   30 HP motor.  Runs good.

SV52-PD).

SVE Skids Roots 32 blower skids. Each with 5 HP 3 phase EXP motor. One has Inlet/outlet silencers. Other has discharge silencer only. Both in good condition.

SV53-PD).

SVE Skids Sutorbilt 3MP with 5 HP 3 phase EXP motor. Small skid. Fair condition.

SV58-PD).

SVE Skids Two Roots 33 blower skids. One has 5 HP 3 phase EXP motor. Discharge silencer. Fair condition. Small skid. Other is 5 HP 3 phase EXP motor, 40 gallon knockout tank with 0.5 hp transfer pump and discharge silencer.

SV49-PD).

SVE Skid Spencer R8L10 with 5 HP single-phase TEFC motor. Inlet/outlet discharge silencers. Fair condition.

SV57-PD).

SVE Skid Roots 56 with 5 HP EXP motor. Knockout tank and pump. Good condition.

SV45-PD).

SVE Skid Sutorbilt Model 3LP Positive Displacement Blower with 5 HP single phase EXP motor. 55 gallon knockout drum and transfer pump. Fair condition.

SV47-PD).

SVE Skid Sutorbilt 3HP small skid with 7.5 HP EXP motor. Fair condition.

SV60-PD).

SVE Skid Sutorbilt 4LP blower with 7.5 HP 230/460V 3 phase motor. 55 gallon knockout drum. Discharge silencer.

SV61-PD).

SVE Skid Sutorbilt 4ML positive displacement blower with 60 gallon knockout tank. 10 HP EXP 3 phase motor. Inlet/Outlet silencers. Good condition.

SV55-PD).

SVE Skid Roots 53 blower with 15 HP EXP 230/460V motor. Small skid. Inlet/outlet silencers. Good condition.

SV48-PD).

SVE Skid Sutorbilt 3LP with 15 HP EXP motor. Inlet/Outl;et silencers. Fair Condition

SV41-PD).

SVE Skid Sutorbilt 5LP Positive Displacement Blower with 15 HP EXP motor 208/230/460V, pressure relief valve, and discharge silencer. Excellent condition.

SV-42-PD.

SVE Skid Sutorbilt 4MP Positive Displacement Blower with 15 HP EXP motor 230/460 3 phase. 30 gallon knockout tank, discharge silencer, inlet dilution air valve with muffler.

SV43-PD).

SVE Skid Sutorbilt 5MP Positive Displacement Blower with 15 HP EXP motor. 230/460V 3 phase. Good condition.

SV44-PD).

SVE Skid Sutorbilt Model 4HP Positive Displacement Blower with 20 HP EXP motor. 230/460V. Inlet/outlet silencers. Tested and works great. Excellent condition.

SV56-PD).

SVE Skid Sutorbilt 5HP blower with 20 HP EXP motor. Inlet/Outlet silencers. Small skid. Good condition.

SV46-PD).

SVE Skid Roots 65 postive displacement blower with 30 HP ODP motor. Motor is inside an aluminum enclosure. Inlet/Outlet Silencers. Good condition.  Tested and ready to go.

SV51-PD).

SVE Skids Three Roots 56 blower skids. First has a 20 HP EXP motor. Hi temperature shutoff, horizontal knockout tank, particulate filter. Fair condition. Other two are Roots 56 with 15 HP 3 phase motor in fair condition.

SV57-PD)

Soil Vapor extraction (SVE) Skid System One: Bisco 60 gallon Knockout tank with Moyno progressive cavity pump, Positive displacement blower with 7.5 HP motor. 80 CFM @ 13.5" Hg. 208V 3 phase XP motor, 2" dilution valve with actuated butterfly valve. SVE Skid System Two: Same thing with a 10 HP XP motor. Both systems are run from a Master Control Panel with EOS ProControl Processor Series 2 Plus, all motor starters, system alarms, programmable data-logging and full remote control via interactive software.

 

 Regenerative Blowers:

SV-36 - RE

Regenerative Blowers: At last count we have over 70  Rotron and Gast regenerative blowers of various sizes from 1 HP up to 15 HP.  Almost all of them are XP and direct drive. Inventory includes these two Rotron Model EN707 shown with 5 HP 230/460/3/60 EXP motors. Also a model EN6F72L with 5 HP 230/460/3/60 EXP) motor.   Also shown at right are two Gast 10HP Model R7-100R-50 3 phase units just acquired.

SV-44-RE	Regenerative Blower:  Rotron blower with 10 HP EXP motor.  230/460V 3 phase EXP motor.  Inlet/discharge silencer
SV-37-RE	Regenerative Blower: Another GAST R7-100R-50 regenerative blower. 10 HP motor.
SV-39-RE	Regenerative Blower SVE Skid:  Gast 5.5 HP EXP 230V single phase motor.  NEMA 7 EXP panel with on/off starter panel mounted on skid.  Complete skid with 55 gallon knockout tank with vacuum relief and high level shutoff of air, inlet particulate filter.  .
SV-40-RE	Combination SVE and Air Sparge Skid:  This skid-mounted system has two Gast regenerative blowers on it.  One blower is a Gast Model R6340R-50 with a 3 HP three-phase motor and the other blower is a  Gast blower with a 4 HP 208/230/460 3 phase motor. Integral NEMA 7 EXP panels for each blower with start stop buttons, vacuum, pressure and temperature guages.
SV-41-RE	Regenrative Blower SVE Skid: Rotron regenerative blower with 1.5 HP XP 115/230 single-phase motor. Rotron 20 gallon knockout drum with high level cutoff of airflow ball, inlet particulate filter, NEMA 7 EXP start/stop/reset panel.
SV-42-RE	Regenerative Blower SVE Skid:  Rotron 5 HP 230/460V 3-phase SVE skid.  Small knockout pot, inlet particulate filter. on/off/reset switch with motor starter.
SV-43-RE	Regenerative Blower Skids:  5 of these identical units just acquired.  Great for pilot tests.  Gast Model R5325R-50 blowers with 1.5 HP 115/230 1 phase EXP motors.  3450 RPM.  NEMA 7 EXP on/off starter panel with power cord.  0-100" w.c.. integral vacuum guage.
SV-45-RE	Regenerative Blower SVE Skid:  Rotron blower with 10 HP 230/460V EXP motor.  55 gallon knockout drum, inlet particulate filter, vacuum relief valve.  NEMA 7 EXP starter panel.
SV-38- RE	Regenerative Blower System:  Gast model R7100R-50 skid-mounted regenerative blower with 10 HP 230/460V 3 phase motor.  300 CFM @ 45" W.C.  Air/water separator tank, particulate filter, level sensors with Myers CT-05 0.5 HP transfer pump.  manual dilution valve.   SOLD 12/11/07
SV-46-RE	Regenerative Blower System:  Rotron Model EN606 blower with 55 gallon knockout tank, sight gage, drain, vacuum relief and automatic shutdown.  Nice condition.
SV-47-RE	Regenerative Blower Systems.  Two identical skids available.  Gast blowers with 4.5 HP EXP motors.  Inlet 60 gallon knockout tanks, auto pump-out with level sensors and pump.  Inlet particulate filters.   Excellent condition.

 

SV-31-M.)

Moisture Knockout Tanks: We also have quite a few moisture knockout tanks still available such as this one. Some are complete with level sensors and transfer pump.

SV-8-M)

S.A.V.E. System for Dual Phase Extraction RSI Model VR3. 8-cylinder power source with catalytic converter with heat exchanger. Phoenix 1,000 Engine air/fuel controller. Dual axle trailer with surge brakes. Spray Aeration Module for liquid treatment.includes spray aeration tank, vacuum and recirculation pumps with spray nozzles, inlet and outlet solenoid valves and bag filter,.heat exchanger, gem sensor water level control with sight glass, applicable piping, valves, gauges, and sampling ports / controls. Set up for remote monitoring with communications software and modem. Sold on 11/1/07.

SV-10-M

VR Systems Internal Combustion Engine.  Dual 8-cylinder unit. The controls are junk, but the unit can be repaired by someone who understands these machines.  Still available as of 1/1/08.

 

 

Air Sparge and Air Compressors:

AS-1-PD

Air Sparge Systems Sutorbilt 2MP blower. 240V 1 ph 5 HP motor with silencers. Designed for 35 SCFM @ 7 PSI.

AS-4-PD.

Air Sparge system Compressor Engineering. Sutorbilt 3HL positive displacement blower with 7.5 HP motor. 230/460 3 phase power.

AS-29	Air Sparge Skids:   Two available.  Roots 22 positive displacement blowers with 5 HP EXP single-phase motors.  NEMA 7 EXP control panels with on/off buttons mounted to skid.  Inlet and discharge silencers.
AS-14-PD.	Sparge Blower Skid   Tuthill blower skid with 3 phase motor 75 HP.  Heat Exchanger

AS-19-PD

Air Sparge System   Sutorbilt Model 3LP positive displacement motor with 10 HP 230/460V 3phase explosion-proof motor. Inlet and exhaust silencers. Skid-mounted.

AS-27

Air Sparge Skid:  Sutorbilt Model 2LL with 3 HP 3-phase 208/230/460V  Complete with on/off control panel.

AS21-PD).

Air Sparge Skid  Two skids available.  Just acquired.  Roots 24 positive displacement blowers with 3 HP 115/230V single phase motor.Power cord,  On/off switch.

AS-5-RV.

Air Sparge Compressor  Gast Model 6066-P-122 rotary vane compressor blower with 7.5 HP 230V 3 phase. 20 CFM @ 20 PSI. and 5 HP 230V 3 Phase. Also a Gast 6066 complete skid with motor missing shown at right.

AS-7-C

Air Compressor Quincy Model QT-10 piston-type 10 HP compressor with Ultra Air high temperature 0.5 HP 115V single phase air drier. 120 gallon horizontal receiver tank. 37 CFM @ 175 PSI.

AS-10-C

Air Compressor   Ingersoll Rand 10 HP compressor. CFM 35.8 at 75 PSIG, 35.2 at 125 PSIG, 35.0 at 175 PSIG Max PSIG = 175 Single-phase. 230V. with HydroBloc air drier and electrical controls.

AS-11-C.

Air Compressor   Quincy Model QT-15 piston-type 15 HP compressor.

AS-19-C.

Air Compressor   Leroi Model WE100SSACII Rotary Screw Air Compressor built on a heavy-duty skid base and rated at 490 SCFM @ 100 PSI. 100 HP ODP motor 460V 3 phase, starter mounted and wired. with air drier skid, air receiver and air receiver tank. ASME code stamped Separator receiver tank. Auto-dual compressor controls 1) constant run and 2) auotmatic start/stop time delay with automatic shutdown. Air aftercooler, 10 micron oil filter, temperature switch. Ultra Air UHR series regenerative desiccant dryer. This unit is in stock at our Michigan warehouse.

AS-21

Becker Rotary Vane Compressor  40 HP unit. Becker Model DTLF 250   275 CFM maximum air flow,  29 PSI maximum pressure output.

AS - 22	Curtis Rotary Screw Compressor  20 HP unit Model RS-20-TLP A/E E12. 140 CFM max 50 PSI max. 230V 3 ph. Operated just three years from 2001-2004.  SOLD 3/15/07
AS-31	Air Sparge Skid:  MD Pneumatics Tuthill Model 3003-21L2  3 HP motor.  NEMA 7 EXP panel with power cord..  Pressure guage, pressure relief valve on discharge.
AS-24	Air Sparge Skids:  4 of these units just acquired.  MD Pneumatics Tuuthill Model 3202-46L3.  7.5 HP motor TEFC single-phase motors.  Skids complete with stop/start buttons on panel and power cord.  Heat exchanger on air discharge, pressure relief valve.  We can remove the coffee cup from the top of the panel for you. .
AS-25	Air Sparge Skids:   4 of these units also just acquired.  Total of 6 available. MD Pneumatics Tuthill Model 3204-46R3.  7.5 HP 208/230/460 3 phase TEFC motors.  Skids complete with On/off panel and power cords.
AS-26	Air Sparge Skid:   MD Pneumatics Model 3206-46L3  7.5 HP 208/230/460V 3 phase TEFC motor.  Sparge skid complete with on/off panel and power cord. Heat exchanger on air discharge.
AS-33	Air Sparge Skids Two available.  MD Pneumatics Tuthill Model MD3210 with 5 HP single phase motor. 3480 RPM. Discharge silencer. Fair condition.
AS-28	Air Sparging Skid   Self-contained unit. Fully enclosed explosion proof and sound proofed. Enclosure measures 6' high x 8' long x 4' wide.  The sparge blower is a Sutorbilt Model 7MP positive displacement blower with a 230/460v motor, includes a Thermal Transfer Products (Racine, Wisconsin) shell and tube heat exchanger Model AHP-400-P. Includes all silencers and gauges for a complete system including  Integral NEMA 7 EXP control panel. SVE unit was sold on 11/11/07.  Sparge still available.
AS-30	Air Sparge Skids:  Two identical units available.  Roots 36 positive displacement blowers.  5 HP 230V 1 phase TEFC motors.  pressure relief valves on discharge, On/off control panel and power cord with plug.
AS-32	Air Sparge Skids:  Two identical units available.  Roots 42 skid with 15 HP motors.  Inlet/outlet silencers.  These skids have never been used.  One skid unit was sold on 4/10/09.
AS-23	Rol-Air Compressor   15HP 1800 RPM, Open Drip-Proof, 3 Phase - 230/460 Volt, 60 Hz .Heavy-Duty, Two Stage, Cast-Iron Cylinders, Splash Lubricated Four Cylinder Pump, and Low Operating RPM's. 120 gallon tank capacity. Dimensions:  L72" x W30" x H58" (1095 lbs.)Performance: 47.3 Cu. Ft. Free Air at 175 PSI
AS-24	200 HP Rotary Screw Compressor  Model GA90-160 Atlas Copco air-cooled, oil injected rotary screw compressor.  delivers 800 SCFM  and 60 PSIG.  200 HP.Controlled by a mechanical timer with motorized air line shutoff valve that allows the compressor to cycle injection air.  Includes a 650 gallon air receiver tank with coalescing filter.  Good condition.  Fresh paint and an overhaul in 2005.   This unit is in stock at our Michigan warehouse.

Complete and Misc. Systems

M-2.

Mobile Remediation Trailer  Features STAT80 Carbon Air 4 tray stripper, 2 ea. 1500# high pressure liquid-phase carbon polish vessels.

M-3.

Mobile Groundwater Treatment System  3000 gallon holding tank, 50 GPM low-profile 6-tray air stripper, oil/water separator, 2 ea. 1500# activated carbon filters. Great rental system.

M-6.

Skid-mounted soil vapor extraction/air-sparge system utilizing 2 ea. Sutorbilt 4ML positive displacement blowers. 225 ACFM @ 6" Hg. SVE. 125 ACFM @ 5 PSI air-sparge. Each blower has a 5 HP XP motor. 230V 1ph. Auto pump-out from knock-out tank. This system has been tested and it works perfectly. Tested and ready to ship. Can put siding around the exterior to make a remediation shed. Very nice system. Perfect operating condition. SOLD 12/08!

M-10.

Two SVE systems with Air Sparge Mobile Pilot Test System. Enclosed trailer 16.5' x 7.5' x 7'H. XP lights, heater, fan. 480V 3ph with 220V and 110V panels and step down transformer. Manufactured by W.E.S. Inc. Original purchase price was $53,332. Purchased in 1995 and ran intermittently until 1999. Two SVE blower systems. SVE1 is 400 SCFM @ 70" W.C. Roots 59 positive displacement blower with 20 HP XP motor. SVE2 is 200 SCFM @ 60" W.C. Roots 36 with 7.5 HP XP motor. Both systems have own knockout tanks. Air sparge system includes a Roots 32 rated at 50 SCFM blower with 5 HP XP motor. Controls are Allen Bradley SLC500 PLC.

M-11.

SVE and Air Injection System  2 piece steel building with diamond plate floor. 14' wide x 20' long x 8' tall. 2 ea. Roots 68 positive displacement blowers with 40 HP explosion proof motor. NEMA 7 control panel inside of building. 200 gallon moisture knockout tank with automatic pump-out. Explosion proof lights and heater. 2 1500# capacity vapor carbon tanks inside of building. Carbon tanks have been sold.

M-17

Dual Phase Extraction Trailer System  Dekker VMAX DVT oil seal liquid ring pump 30 HP TEFC motor, 300-400 CFM, air water separator, Moyno pump, AEROMIX BREEZE air stripper, controls and interfaces. All mounted on open trailer. Currently located in Colorado..

Carbon Adsorption  
Click here to visit our website dedicated to Carbon Filter Systems

Liquid-phase Carbon Adsorbers:

LC-1	High Flow Mobile Carbon Treatment Trailer:  SES Model GWT-660.  "Supertrailer"  Liquid phase carbon treatment system.  48' drop-deck semi trailer complete with 2 ea. 10,000# activated carbon tanks.  All 6" diameter plumbing, valves, hoses, and interconnects.  Multi-chamber bag filter with bypass, flow totalizer, vacuum loop on discharge,  Capable of flows up to 660 GPM. We have four of these "Supertrailer" systems currently available.  One unit out on rental.
	Global 4" auto-prime Trash Pump.  Trailer-mounted 4.5 liter 115 HP John Deere diesel engine.  2500 RPM.  Capable of up to 700 GPM pump rate at 40 PSI.  Great rental  for dewatering treatment.  LCD display visual interface allows operator to control and vary the engine RPM.  Click here for pump curves for this unit.
LC-2	High Flow (up to 660 GPM) Mobile Carbon Treatment Trailer:  SES Model GWT-660.  "Supertrailer"  in action on a site in Michigan.  2 of these systems currently available.
LC-3	High Flow Mobile Carbon Treatment Trailer:  SES Model GWT-266 "Supertrailer" Liquid phase carbon treatment system.      48' drop-deck semi trailer with 2 ea. 4000# activated carbon tanks.  All 4" dia plumbing connections, multi-chamber bag filter with bypass.  Vacuum loop and flow totalizer on discharge.  Capable of handling up to 266 GPM.  rated at 75 PSIG.
LC-4)	4 ea. High flow Mobile Carbon Adsorbers.  Each adsorber can contain up to 5000# of activated carbon. Trailer mounted on low-boy flatbed, with 4 chamber bag filter on inlet. Plumbed, valved and set up to handle flows up to 660 GPM. rated at 75 PSI.  Sold 2/18/09

LC-5)	6 ea. High pressure-rated steel carbon tanks Another SES GWT-660 Supertrailer.  Each tank will hold up to 10,000# of activated carbon. Up to 660 GPM flow through each tank. Brand new tanks. Corrosion-resistant inner lining.  Stainless internals.  Several sizes of carbon tanks currently available.  If we don't have the size you need, we can build it.
LC-11	Calgon Carbon Liquid-Phase Adsorption Skid   100 GPM rated with backwash piping.  All valving and piping.
LC-6)	Fiberglass 150 PSI carbon vessels.   2500# carbon capacity per vessel.  125 GPM max suggested hydraulic flow rating.  63" dia. x 105.5" overall height with top works.  Carbon Service and Equipment model Aqua 2500 HP.  2" FNPT top inlet and 3" FNPT bottom outlet.

LC-13)

Fiberglass 150 PSI carbon vessels.  1500# carbon capacity per vessel. 60 GPM hydraulic flow rating. 48" dia. x 110" overall height. Steel cage around exterior is optional. Excellent condition. 4 available as of 3/15/06

LC-10). .

Many various 100-1500 # FRP carbon tanks various sizes and capacities. We pressure test each tank before we ship them so you can be assured of its' integrity.

Vapor-Phase Carbon Adsorbers:

VC-1

US Filter Model RB-20 Vapor Adsorbers.  Two of these 20,000# of carbon capacity units currently available. Dimensions per roll-off container unit are are 21' long x 8'6" wide X 8'6" tall.  Can process up to 12,000 CFM per adsorber.  3' deep carbon beds.  Roll off units can be shipped fully loaded with carbon.  Great for MGP tent air evacuation applications. One unit sold 6/09.

VC-3)

Tigg N-8000 Radial Flow Vapor Phase Carbon Vessels Four available.   Capable of processing up to 8000 CFM of airflow. 112" diameter X 94" tall. 6300# activated carbon capacity . 18" dia. inlet duct connection on top. Flow is from central stainless screened distributor, outward through adsorbent, exhausting through stainless screened openings to atmosphere. Location: Pittsburgh, PA.

VC-5).

2ea. Steel adsorbers. Envirotrol Model VP1000 1000 CFM rated. Epoxy inner lining. Enamel paint exterior coating. 1000# carbon capacity. Rentals only.

VC-7).

6 ea. Plastic liquid and vapor vessels (Tigg) 1000# carbon capacity. 2 units still available as of 3/15/08.

VC-10.)

SES 12,000 CFM Carbon Air Abatement Filter System   8' x 20'L x 8' tall steel filter housing insulated container building. Contains two banks with 1728# of carbon per bank. Two service doors in building. Steel ladder for roof access. 3600 watt explosion proof heater and lights. This system was designed, built and installed by installed by Schrader Environmental at a facility in Bay City, Michigan.  It was on site as a rental for only 6 months and was used to remove ammonia and phenol vapors with an acid impregnated activated carbon. This system is now in stock and ready to ship. Fan was sold recently, however.  Great system for high air volume - low concentration applications.

VC-12.)	Carbtrol Vapor-Phase Carbon Tanks   4 ea. 1500# vapor tanks.  These and many other similar tanks are still  available as of 3/1/1/09..
VC-2)	Calgon Vapor-Phase Carbon Vessels Two available. Model 72-LAPS. High Pressure 6' dia. vessels. 12' overall height. Rated for 900 to 2400 CFM. Vessels each contain up to 5000# capacity of activated carbon media.    Still available.  Built in 1988. Currently stored inside near Detroit, Michigan. . Make an offer.  Only used for 2 months!

Catalytic/Thermal Oxidizers
 

OX-48).

Three Global Catalytic Oxidizers: two separate Model 5 Globals are currently available. Global Technologies Model 5.0 RemediCat oxidizers. Skid-mounted with 5 HP regenerative blower. Rated for 500 SCFM. Also a Global Model 7 catalytic oxidizer which has been factory reconditioned at Global and is ready to go complete with a Lamson 20 HP integral blower

OX-29.)	Two Global Model 2 Thermcat 250 CFM thermal/catalytic oxidizers and a Global Model 5 Thermcat Thermal/Catalytic Oxidizer.  500 CFM unit.  Built in 2000.  Updated PLC on the Model 5
OX-73	Thermtech Model VAC100  Thermal/Catalytic oxidizer.  1000 CFM.  Good running condition.  Ready for rental or purchase.   Stack extension piece available but not shown in photo here.
OX-25.)	Chlorinateds Catalytic Oxidizer and Scrubber Global Chlorocat Model 5 catalytic oxidizer and integrated scrubber package. 500 CFM. Built in 2000 and ran for about one year. Free-standing 20' stack. Excellent condition. More details forthcoming. Usually, these cannot be found for rent. Oxidizer in good condition. Scrubber will need work.
OX-40	Thermal/Catalytic Oxidizer Thermtech VAC25 trailer  Thermal/catalytic oxidizer with heat exchanger. Integrated system with Lamson Blower.  Transformer for conversion of incoming single phase power to three-phase.  Most of our other Thermtechs are not equipped with a heat exchanger like this one. 250 CFM unit. .Very good condition.
OX-54	Chlorinateds Catalytic Oxidizer and Scrubber  Catalytic Combustion 500 CFM system. HD-SRCO 500G Chlorinateds/Florinateds capability. 50% thermally-efficient heat exchanger. 316L stainless internals.  2.3 cu.ft catalyst volume.  500,000 BTU/hr. primary air burner.  NEMA 4 control cabinet with PLC controller.  316L crossover transition for connection of oxidizer outlet and scrubber inlet. Venturi liquid quench constructed of Hastelloy C22. HCl scrubber constructed of 316SS, recirculation pump and piping, chemical feed system with pH/ORP controller, 460V 3 phase power.Near perfect condition. Recently tested and prepped for shipment.  Available immediately.
OX-44	2000 CFM Catalytic Oxidizer/Scubber System for Chlorinateds  Catalytic Combustion Model HD-SRCO-2000G. 20,088 cu. in. HDC ceramic monolith oxidation catalyst.  316L internals and 55% thermally-efficient heat exchanger.  820,000 BTU/hr. burner.    60HP VE Blower skid with KO Tank, and  99% HCl Scrubber were both sold..  Available as of 3/1/09.
OX-6.)	Trailer-Mounted Electric Catalytic Oxidizer  Airex Katox 100 CFM unit. 230V single-phase. Heat exchanger. Roots URAI 33 positive displacment blower with 5 HP motor.. Controls package. Works great. Runs on single-phase electric. No gas hookups needed.
OX-7.)	Falco 300 Electric Catalytic Oxidizer and a) Falco 100 CFM catox unit   Falmouth Products Falco 300 units are rated for 300 CFM. The unit has an integrated 10 HP blower package, skid mounted.. Also a Falco 100 integrated unit with blower package is now available for immediate rental or purchase. Also Note: Falco 100 catalytic oxidizer - complete rebuild in 2002 and then operated for 9 months.
OX-57	Catalytic Oxidizer:   Global Model 7 catalytic oxidizer.  Rated for 750 CFM.  Ran for one year in 1998.  Unit is integrated with a 500 ICFM @ 8" Hg. 20 HP Lamson blower.  Recently  factory refurbished at Global.  Ready to go as of 3/1/09.
OX-43.)	Electric Catalytic Oxidizer "The Coffin"  King Buck 100 CFM 3 phase electric catalytic oxidizer. Two separate skids. One with regenerative blower and second skid for oxidizer.   Have complete O&M manual.
OX-49.)	Thermtech Model VAC50 500 CFM thermal/catalytic oxidizer.   .
OX-55.)	VAC10 Thermtech thermal/catalytic oxidizer 100 CFM skid-mounted unit. We are currently shop-testing this unit.
OX50).	Global Model 10 Catalytic Oxidizer Mfg. date December, 1994. Decommissioned and shut down. Still on site as of 6/01/06 in Michigan.
OX51).	Global Model 7 Thermcat  Thermal/catalytic oxidizer. Set up for thermal mode. Catalyst could be added. Mfg date: January, 2002. Decommissioned and currently shut down on site in Michigan
OX52).	Global Model 7 Thermcat:  Thermal/catalytic oxidizer. Set up for thermal mode. Mfg. date September, 2000. Still operating on site in Michigan but scheduled for shutdown within 3 months.
OX53).	Global Model 5 Thermcat  Thermal/Catalytic Oxidizer. Mfg. date: May, 2000. Set up for thermal mode. Decommissioned and currently located on site in Michigan.
OX65.)	3000 CFM Electric Catalytic Oxidizer 3000 CFM electric catalytic oxidizer. System is four years old and has very limited usage. Currently located in Iowa. Dimensions are 12' long x 7' wide x 12' tall. This unit sold for $120k. The price for a new one has gone up considerably along with the price of stainless in the last four years.
OX-68.)	Thermal Catalytic Oxidizer:  Located in Los Osos, CA   Baker Furnace   Model SX 300 with URAI 47 rotary lobe, positive displacement extraction blower. Catalytic mode for lower concentrations and for supplemental fuel conservation. 133" L x 84" W x 60" H (height of exhaust stack is 176") mounted on a skid.  The system was operated between 1997 and 2000  and has approximately 13,054 hours (16 months) of run time.  Power: 230 Volt, single phase. 300 CFM rated. Efficiency: 99% (Direct Fired), >97% (Catalytic). Burner Rating: 750,000 BTU/hr. Weight: 4,700 lbs.  Working condition, could use some paint
OX-72.)	Baker Furnace Model SX-500 Thermal Catalytic Oxidizer.  1,250,000 BTU/hr. rated.  Only ran for short period of time in 2002.  Excellent Condition.

Oil/Water Separators

OW-1	Various Oil Water Separators available.  Photo taken 1/22/08  All Oil/water separators are completely cleaned and reconditioned before we ship.  If new media is needed, we can provide it.  Either way, you save a lot of money.
OW-14	200 GPM Oil/Water Separator   AFL Industries vertical tube coalescing separator.  Model VTC-200A2.  10'6" long x 6'4" wide x 6'3.75" high.    Molded fiberglass construction.  1420 gallon operating capacity.  650 gallon oil storage compartment.  19,000 lb. operating weight.  5'0" long x 4'0"wide coalescing separation chamber packed with vertically positioned matrix of perforated oleophilic tubes, complete with sludge collection zone below tubes and sludge draw header.  6" dia. rotary pipe skimmer.  Complete with hinged top acess lid. This unit brand new will cost about $32,000.
OW-8)	Fiberglass Oil/Water Separators  50 GPM HydoFlo unit just back from rental.
OW-2	Stainless Steel 100 GPM HydroQuip oil water separator and 10 GPM old Ejector Systems steel unit.  The HydroQuip unit sold May 1, 2008
OW-14	Fiberglass Coalescing Oil/Water Separators. 2 units currently available.  HydroFlo Model DP8 20 GPM coalescing separators with sludge hopper chamber.
OW-12)	50 GPM Oil/Water Separator  Remedial Systems design. No sludge chamber. Fiberglass construction with corregated coalescing media inside. Good condition. Needs some cleaning only.  Integral oil collection sump section.
OW-10) .	Another 30-40 GPM OWS.  This one was marketed by Carbon Air
OW13.)	Truck Wash Gravity Oil Water Separator  Built in 1994 and NEVER USED. Sensaphone for remote phone modem monitoring. Flashing beacon light. Electric variable speed controls. Stainless steel oil recovery tank and oil/water separator vessel. Designed for demanding conditions without taking up much floor space.

Air Strippers
 

AIR-1.)	Carbonaire STAT 400 air stripper.  With fan and control panel.  200 GPM rated.  Just acquired.  Very clean. With control panel intact.   Available for immediate rental.
AIR-3)	Air Strippers:  As you can see, we have a large assortment of air strippers of various sizes and materials.  There are three Northeast Shallow Tray 3641 units shown the foreground. Air strippers are thoroughly cleaned, leak-tested, gaskets replaced if necessary, and controls retrofitted, if necessary.  Two systems were sold and one available as of 3/21/09.
AIR-4	More Air Strippers.  Including a Carbon Air STAT15, two Carbon Air STAT30 units, and a stainless steel NEEP Model 2341.
AIR-5	QED EZ-Tray Model 16.4.  Rated for up to 120 GPM.
AIR-24	Hydro Group 2275 GPM Air Stripper Towers:  Two of these units available.  NEVER USED. 10'2" diameter.  41'6" tall.  Constructed of 5000 series aluminum.  15,200 CFM blowers.  25' packing depth of Jaeger tripaks 3.5" diameter polypropylene packing media. 304 stainless orifice plate liquid distributor and 4 re-distributors.  7100# dry weight. 10,800# packing dry weight.  Location: Madison, Wisconsin   Available as of 4/15/08.
AIR-2.)	Shallow Tray Air Strippers  Two different Northeast Environmental Model 1331 units. Each unit has three trays.. Polypropylene tray construction. 3 HP blowers.
AIR-7	Multi-stage diffusers  3 identical Carbtrol 4-stage diffuser air stripper units 2 HP explosion-proof blowers. 6 stage available without blower. It requires 3 HP. Also an 8-stage and a 12-stage unit are available with 7.5 HP blowers.. 4 stage will do 5-10 GPM . 6-stage will do 20 GPM. PVC construction. Very low profile (3' height ) air stripper. Particularly resistant to iron fouling problems. Easy to clean design. Also a couple of Aeromix Breeze units available.
AIR-10)	Shallow Tray Air Strippers  Model 2321P AF1-12 fan with 2 HP XP motor. 2 polyethylene trays. Also a skid-mounted 2331with 3 trays and NY blower pressure fan. 3 tray unit can be sold with controls.
AIR-14.)	Stainless Steel Tray Air Strippers  2 ea. Northeast Environmental (NEEP) Model 1321 with AF-12 2 HP 3 phase blowers. @ NEEP Model 2331 stainless steel strippers with 3 HP fans. One Carbonair Model STAT15 5 trays with 3 HP fan. Excellent condition.
AIR-17)	QED EZ Stacker Tray Stripper  QED 5-tray fiberglass air stripper with Rotron regenerative blower. 1-10 GPM model.  Also a QED 20 GPM 6 tray available (not shown).
AIR-19)	Diffuser Air Stripper  Aeromix Breeze System. 79" x 30" x 35" tall. Complete setup with blower, gravity drain into holding tank with pump, control panel and level sensors. 80 GPM design flow. Currently on rental.  Available August '08  Click here to view the shop test video which show the diffuser action of the water.
AIR-20)	Tray Air Stripper  Carbon Aire STAT30 stainless steel unit. Complete with 2 HP EN505 blower 230/460/3/60 EXP. 3450 RPM 5.2/3.1 FLA.
AIR-22).	Low Profile Air Stripper   Duall Divison of Metpro Model LPS54. low profile tray air stripper. Heavy-duty PVC construction. Rated for 99% BTEX removal at 200 GPM. 2600 CFM fan at 13" w.c. with 20 HP TEFC motor. . Belt-drive fan has adjustable sheaves. Stainless steel hardware. 2900# dry weight. 8000# wet weight (approx.) 3" dia. influent 6" dia. effluent. Stripper dimensions are 54" wide x 74" long x 88" tall. (not including fan). Fan adds another 60" to the length of the footprint (134" x 54").
AIR-23):	Tray air stripper: ORS LO-PRO multi-stage sieve tray air stripper. 1-20 GPM Model with Rotron 7.5 HP 3 Phase blower. HD polyethylene construction with stainless steel bubble plates.  Excellent condition.

Product Recovery Systems

P-1.)	Auto-Skimmer Oil Recovery System  R.E. Wright Automatic bailer product recovery system. Works in 2" and 4" wells.. Runs on standard 115 VAC 15 amp power. Product is discharged into standard 55 gallon drum. I really think this is an awesome system. Just plug it in and go. Location: San Bernadino, CA $3000.
P-2.)	Belt Skimmer System  DPI Petro Skimmer with 35' long belt. Designed to fit in 4" well. Runs on 110V power.
P-4.)	Free Product Recovery Systems  3ea. Clean Environment SOS-4 4" dia. pumps that operate 3 ea. CEE skimmers. 2 ea. controllers for the SOS skimmer pumps. 5 ea. Tank Full Shut-Off (TFSO) controllers and a Tank Full level switch. 2 ea. tank inlet fittings for product hose.
P-5.)	6 ea. AP-4TL total fluids top-loading pumps and a controller unit, 10 ea. AP-3 total fluids pumps. 3.5" dia. 36"long
P-6.)	7ea. Ejector Systems top-loading total fluid pumps. 3.5" dia. 36" long
P-7).	13 ea. QED Solo bottom- loading total fluid pumps 3." dia. 29" length.
P-8)	12ea. QED Solo total fluid pumps. (3.5" dia. 29" length) Essentially, these are bottom loading Solo pumps inside an open top stainless steel can.
P-9)	Belt Skimmers There are five units, built by DPI in 1993. They were never used.  All located in Cleveland, Ohio.

Water Treatment Equipment

WT-1

Clarifier System for solids removal.   More information forthcoming.  In stock at our Ovid, Michigan facility.

WT-2.)

16 stage Rosedale Model 8 Dual Automatic Backwashing Bag Filter Systems  2 units available - Filter bag housings pre-plumbed on a common skid manifold.  6" dia. manifold.  16ea.  8x30 bag filters per skid unit.  100 PSI pressure rated.  Very good condition.

Other Equipment

OT-3.)	Variable Speed Motor Inverter/Controllers3 units. Baldor Series 15 controllers. Catalog # ID15202-E. 2 HP rated. 7.0 continuous amps. 14.0 peak amps. 230 volts 3 phase or single-phase with reduced output current.
OT-8.)	Grundfos Environmental Pumps: 2 unused 7.5 HP 6" diameter Model 2366119020 Grundfos environmental stainless steel pumps. Still in box. Also a 3/4 HP Model 2345229404 Grundfos pump. We have literally dozens of the small 0.5 HP Model 5E5 5 GPM Grundfos pumps.
OT-9.)	Econo Pump System Grundfos CR-16 pump with 7.5 HP motor. 84 GPM, motorized ball valve, low water pressure switch, 20" x 36" tall stainless steel tank.
OT-13	Various Heat exchangers.  Lots of units, mostly used for treating air sparge discharge.  You know how expensive these things are new.
OT-10	Airtek Aftercooler:  Model 406Q with built-in moisture separator which effectively cools the high temperature effluent air from air compressors. 185-200 CFM @ 100 PSI. Will cool from 182F to 15F above ambient.
OT-13):	Liquid-to-Air Heat Exchanger Xchanger Model LC-24 heat exchanger unit. Excellent condition.
OT-12).	Explosion-proof heaters and XP Lights At last count we have over 65 explosion-proof heaters and over 100 explosion-proof lights in stock. So we can pass on some big savings if you need any of these items to incorporate into your build-out job.

Contact us by phone for further information:

Physical Address:     212 S. Pine River    Ithaca, Michigan 48847
Phone: (989) 875-6500
Fax: (989) 875-8880

Back to Remediation Equipment Technologies page.